HYGEAR SUSPENSION AD-ON ReZ-E for Yamaha Phazer

The AD-ON Reservoir product line is a series of adjustable and non adjustable reservoir kits. These kits can be added to most rebuildable standard shock absorbers to improve performance and feel. The reservoirs are designed to increase fluid volume that will decrease shock fade. Compression adjustable reservoirs provide adjustability and damping control. These reservoir kits are the essential ingredient to enhance the performance of any standard type rebuildable shock absorber.


Non adjustable reservoir $129.99 ea	Compression adjustable reservoir $229.99 ea

	Mounting kits	from $59.99 ea
	Mounting kits consist of all parts necessary to attach a reservoir system to a standard type shock absorber. Machining may be necessary.

Benefits
Compression adjustable
	A compression adjustable reservoir adds an additional damping circuit to a standard type rebuildable shock absorber. This damper is designed to boost the shock's performance in rough terrain. The compression adjuster also gives you the ability to change the shock's performance for smooth riding conditions or rough conditions at the end of the day
Increased cooling capacity
	More oil helps shocks run cooler so you can ride hard for longer periods of time. Increased oil capacity will extend time between rebuilds.
Bladder type separation system
	Bladders prevent Nitrogen gas from mixing with the oil causing an unresponsive or bouncy feel. Bladders have a friction-free seal that doesn’t drag or leak!
Compact in size
	AD-ON Reservoirs are specifically designed to be mounted in the most confined spaces. This design allows us to easily add a reservoir to a wide range of applications.

Volume Capacity:
The 405 bladder reservoir is designed to handle 12.5mm - ½”, 14mm and 16mm / 5/8” shaft diameters @ 6” stroke volumes. Extended Nitrogen Caps are available.

Compression Adjuster capacity:
The 405CA bladder reservoir compression adjuster can be setup to work with 12.5mm - ½”, 14mm and 16mm / 5/8” shaft diameters @ 6” stroke volumes. The compression adjuster utilizes a low speed needle metering system with adjustable high speed blow off. This adjuster incorporates a unique design that has full range capabilities. When adjustments are made to the valve, changes are made to low speed metering and high speed blow off simultaneously. This is a very effective control valve that provides excellent damping support for a wide range of applications.

Note* When ordering a reservoir kits, we need to know the application in order to pre set the compression adjuster valve. Reservoir mounting kits are sold separately. Not all mounting kits are available for retail purchase. Machining may be required.