Products

Custom Axis Reservoir Cap Snap Ring
16-01-004
Custom Axis Reservoir Cap Snap Ring
Includes (1) Snap Ring This snap ring retains the reservoir cap in 1.75" ID Custom Axis Reservoirs Custom Axis Part # RR-06
$ 9.99 USD
Custom Axis Reservoir Clamp & Standoff Kit
19-01-001
Custom Axis Reservoir Clamp & Standoff Kit
For use with one reservoir.  Includes (2) standoffs, and (2) clamps
$ 24.99 USD
Custom Axis Reservoir Tube
42-01-010
Custom Axis Reservoir Tube
Includes (1) Tube  Dimensions 1.75” ID x Overall Length (OAL). Custom lengths are also available
$ 116.99 USD
Custom Axis Snow Seal Head Assembly
43-01-001
Custom Axis Snow Seal Head Assembly
Includes (1) Seal Head    Application: Confirmed fitment on below shock numbers   Dimensions: Shaft: 0.625" Body ID: Length:
$ 164.99 USD
Custom Axis Snow Service Kit
29-01-004
Custom Axis Snow Service Kit
For One Shock Only. Can be used for Front, Center, or Rear Custom Axis Snow Shocks   Kits are available...
$ 39.99 USD
Custom Axis Steel 167 Body Snap Ring
07-01-101
Custom Axis Steel 167 Body Snap Ring
Includes (1) Snap Ring   Application: Confirmed fitment on below shock numbers   Dimensions: Total length: Choose above ID: Thread...
$ 204.99 USD
Custom Axis Steel Piggyback Coil Over Body Cap Custom Axis Steel Piggyback Coil Over Body Cap
22-01-013S
Custom Axis Steel Piggyback Coil Over Body Cap
Includes (1) Body Cap   Dimensions:Eyelet ID:Center eye to end length:Eyelet thickness:Internal thread ID:   Application: Confirmed fitment on below...
$ 249.99 USD
Custom Axis Steel Snap Ring Body Cap Custom Axis Steel Snap Ring Body Cap
22-01-002
Custom Axis Steel Snap Ring Body Cap
Includes (1) Body Cap   Dimensions:Eyelet ID:Center eye to end length:Eyelet thickness:Internal thread ID: 90 DEG Port, Fine Threaded   ...
$ 119.99 USD
Custom Axis Steel Threaded Body
07-01-001
Custom Axis Steel Threaded Body
Includes (1) Steel Threaded Body   Application: Confirmed fitment on below shock numbers   Dimensions: Total length: Choose aboveID:Thread length:Thread...
$ 124.99 USD
Custom Axis Thrust Washer
104-01-001
Custom Axis Thrust Washer
Includes (1) Thrust Washer for GM Eyelet .75" id x Select Width
$ 19.99 USD
Custom Axis Yamaha YFZ450 Rear Clevis Eyelet Custom Axis Yamaha YFZ450 Rear Clevis Eyelet
23-01-013
Custom Axis Yamaha YFZ450 Rear Clevis Eyelet
Custom Axis clevis eyelet for Yamaha YFZ450 rear applications. Internal width is 1.118" OAL is 4.460". Includes rebound adjuster assembly.
$ 379.99 USD
Dual Pressure 2 Fitting
03-35-013-A
Dual Pressure 2 Fitting
This kit included a Dual Pressure 2 Reservoir Fitting. This is the standard fitting for a Dual Pressure 2 Kits.
$ 24.99 USD
Dual Pressure 2 Rear
03-35-001-A
Dual Pressure 2 Rear
Learn More About Dual Pressure   Includes one Dual Pressure Reservoir, Billet Aluminum Mounting Clamp, Fittings, and hardware. *Fits rear...
$ 184.99 USD
Dual Pressure 2 Service Kit
03-35-015-A
Dual Pressure 2 Service Kit
This kit included everything you need to service one Dual Pressure 2 Reservoir. This replaced all seals, stickers, and valve cores to keep...
$ 19.99 USD
Dual Pressure 3 Front Banjo and Stud Fitting Dual Pressure 3 Front Banjo and Stud Fitting
03-35-006-A
Dual Pressure 3 Front Banjo and Stud Fitting
This kit included a Dual Pressure 3 Reservoir Banjo and Stud Fitting for use in 0° mounting locations. This is the standard...
$ 49.99 USD
Dual Pressure 3 Rear Banjo and Stud Fitting Dual Pressure 3 Rear Banjo and Stud Fitting
03-35-007-A
Dual Pressure 3 Rear Banjo and Stud Fitting
This kit included a Dual Pressure 3 Reservoir Banjo and Stud Fitting for use in 90° mounting locations. This is the standard...
$ 49.99 USD
Dual Pressure 3 Service Kit
03-35-016-A
Dual Pressure 3 Service Kit
This kit included everything you need to service one Dual Pressure 3 Reservoir. This replaced all seals, stickers, and valve cores to keep...
$ 19.99 USD
Dual Pressure 3 Upgrade Kit
03-35-019-A
Dual Pressure 3 Upgrade Kit
This kit included everything you need to upgrade your Front Dual Pressure 2 Reservoirs Kit to a Fox Float 3...
$ 94.99 USD
Dual Pressure Clamp
03-35-024-A
Dual Pressure Clamp
This clamp is the replacement clamp for all Dual Pressure reservoirs systems. This clamp comes with a both the clamping screw and...
$ 34.99 USD
Dual Pressure Schrader Cap Dual Pressure Schrader Cap
03-35-017-A
Dual Pressure Schrader Cap
Includes (1) Schrader Cap   This cap is the replacement Schrader Cap for Dual Pressure 2 and Dual Pressure 3 reservoirs systems.
$ 19.99 USD
Dual Stage High Pressure Pump
64-03-016
Dual Stage High Pressure Pump
Dual chamber function allows for more air volume to be added with each pump. Switch to the single chamber to...
$ 84.99 USD
Eibach 1.88”ID x 10.00”L Spring (Select Rate)
1000.188.0050
Eibach 1.88”ID x 10.00”L Spring (Select Rate)
$ 99.99 USD
Eibach 1.88”ID x 8.00”L Spring (Select Rate)
0800.188.0100
Eibach 1.88”ID x 8.00”L Spring (Select Rate)
$ 99.99 USD
Eibach 2.25”ID x 7.00”L Spring (Select Rate)
0700.225.0225
Eibach 2.25”ID x 7.00”L Spring (Select Rate)
$ 99.99 USD
Eibach 2.25”ID x 8.00”L Spring (Select Rate)
0800.225.0150
Eibach 2.25”ID x 8.00”L Spring (Select Rate)
$ 99.99 USD
Eibach 2.25”ID x 9.00”L Spring (Select Rate)
0900.225.0175
Eibach 2.25”ID x 9.00”L Spring (Select Rate)
$ 99.99 USD
Eibach 2.50”ID x 10.00”L Spring (Select Rate)
1000.250.0250
Eibach 2.50”ID x 10.00”L Spring (Select Rate)
$ 99.99 USD
Eibach 2.50”ID x 8.00”L Spring (Select Rate)
ES0800.250.0225
Eibach 2.50”ID x 8.00”L Spring (Select Rate)
$ 99.99 USD
Elka - 36mm Body Spring Separator (Select Total Length)
60-02-001
Elka - 36mm Body Spring Separator (Select Total Length)
Includes (1) Spring Separator.   Select Total Length from drop down above.
$ 22.99 USD
Elka - 36mm Steel Body
07-02-001
Elka - 36mm Steel Body
Includes (1) Body   Application: Confirmed fitment on below shock numbers:   Dimensions: Total length: Enter length above ID: 36mm...
$ 84.99 USD
Elka - 46mm Body, 72mm TLG, Rear Spring Separator
60-02-002
Elka - 46mm Body, 72mm TLG, Rear Spring Separator
Includes (1) Spring Separator   Dimensions: 72mm TLG  
$ 22.99 USD
Elka - 46mm Steel Body
07-02-002
Elka - 46mm Steel Body
Includes (1) Body   Application: Confirmed fitment on below shock numbers   Dimensions: Total length: Enter length above  ID: 46mm...
$ 108.99 USD
Elka - 57mm Aluminum Body
07-02-004
Elka - 57mm Aluminum Body
Includes (1) Body. Enter overall length desired.   Application: Confirmed fitment on below shock numbers   Dimensions Total length: Enter length...
$ 137.99 USD
Elka - Body Cap, 10mm Port, M50-1.5 thread, Assembly Elka - Body Cap, 10mm Port, M50-1.5 thread, Assembly
22-02-003-A
Elka - Body Cap, 10mm Port, M50-1.5 thread, Assembly
Includes (1) Body Cap   Dimensions: 2.225" base to center eye 0.6" bore 2.4" od M50-1.5 thread
$ 74.99 USD
Elka - Decal Sheet, Legacy Gen1 Elka - Decal Sheet, Legacy Gen1
21-02-008
Elka - Decal Sheet, Legacy Gen1
Replacement Decal kit fits Legacy series piggyback and remote reservoirs Includes (1) Decal Sheet featuring 9 decals  Dimensions: Logo Decals: 3.7"...
$ 19.99 USD
Elka - Piston, 36mm
38-02-001
Elka - Piston, 36mm
Includes (1) 36mm Piston 
$ 33.99 USD
Elka - Preload Collar, Front, 36mm w/ set screw
57-02-000-A
Elka - Preload Collar, Front, 36mm w/ set screw
Includes: (1) Preload Collar and (1) M4 x 0.7 mm Thread, 18 mm Long Bolt   Please Select Steel Body or...
$ 40.99 USD
Elka - Preload Collar, Rear, 46mm w/ set screw
57-02-001-A
Elka - Preload Collar, Rear, 46mm w/ set screw
Includes: (1) Preload Collar and (1) M4 x 0.7 mm Thread, 18 mm Long Bolt 46mm Shock Body Rear Shock Threaded  ...
$ 40.99 USD
Elka - Rebound Adjustable Eyelet Assembly, 15mm Heim, M16-1.0, 0 Deg Elka - Rebound Adjustable Eyelet Assembly, 15mm Heim, M16-1.0, 0 Deg
23-02-004
Elka - Rebound Adjustable Eyelet Assembly, 15mm Heim, M16-1.0, 0 Deg
Includes (1) Eyelet Assembly for 15mm Heim Bearings.   Dimensions: A Base to center eye: 2.20" B Mount (thread id):...
$ 114.99 USD
Elka - Rebound Adjustable Eyelet Assembly, 15mm Heim, M16-1.0, 0 Deg Elka - Rebound Adjustable Eyelet Assembly, 15mm Heim, M16-1.0, 0 Deg
23-02-011
Elka - Rebound Adjustable Eyelet Assembly, 15mm Heim, M16-1.0, 0 Deg
Includes (1) Eyelet Assembly for 15mm Heim Bearings.   Dimensions: A Base to center eye: 2.20" B Mount (thread ID):...
$ 120.99 USD

Scroll To Top