Products

22-03-026-A
Fox - Body Cap, Pellet Fill, 24 TPI
Includes (1) Body Cap Assembly for Fox Pellet Fill Body Caps These shocks are charged by using a needle through the...
$ 49.99 USD
07-03-159
Fox - Body, 1.5" x 6.80" TLG, Spiral Groove ID, Black Ano III
Includes (1) Body   Dimensions: A Total Length: 6.80"B Mount Thread Length:C Bore: 1.459", Spiral Groove IDUNS Cap Thread
$ 149.99 USD
07-03-160
Fox - Body, 1.5" x 8.000" TLG, Black
Includes (1) Body   Dimensions: A Total Length: 8.00"B Mount Thread Length:C Bore: 1.459"UNS Cap Thread
$ 109.99 USD
07-03-161
Fox - Body, 1.5" x 9.700" TLG, Black
Includes (1) Body   Dimensions: A Total Length: 9.70"B Mount Thread Length:C Bore: 1.459"UNS Cap Thread
$ 129.99 USD
07-03-162
Fox - Body, 2.0" x 7.00" TLG, Clear Ano II
Includes (1) Body   Dimensions: A Total Length: 7.00"B Mount Thread Length: 1.10"C Bore: 1.834"UNS Cap Thread
$ 109.99 USD
64-03-008
Fox - Bullet Tool, FLOAT AirShox, Air Sleeve Installation
Includes (1) Bullet Tool   Application: Bullet tool used to install Air sleeves.   *Note, NOT for Fox Mega Floats. 
$ 49.99 USD
08-03-003
Fox - Bumper, 620"ID x .700"TLG
Includes (1) Bumper   Application: Confirmed fitment on below shock numbers   Dimensions: TLG: 0.700" ID: 0.620"
$ 19.99 USD
21-03-314
Fox - Decal Band, Factory Orange
Includes (1) Reservoir Band Decal
$ 12.99 USD
64-03-038
Fox - DSC Adjuster Tool
Includes (1) Tool    
$ 14.99 USD
64-03-002
Fox - Dual Sided Air Pump
 300 PSI Max Pump with bleed.  
$ 74.99 USD
52-35-300-A
Fox - DX Bushing Kit, Select Dimension
Includes (1) DX Bushing Kit (x1 DU Bushing, x1 Pin, x2 Seals, x2 Thrust Spacers) Applications: Commonly Found on Fox...
$ 39.99 USD
21-03-315
Fox - EVOL Chamber Decal, Factory Black
Includes (1) EVOL Chamber Decal
$ 12.99 USD
42-03-027
Fox - Evol Tube, 1.07" Bore, 4.0" TLG, Kashima
Includes (1) Evol Tube    Application: Float Evol Shocks commonly found on ATV's and Snowmobiles.    Dimensions:  Total length: 4.0" ...
$ 129.99 USD
42-03-005
Fox - Evol Tube, 1.07" Bore, Black
Includes (1) Evol Tube   Application: Fox Float Evol Shocks.    Dimensions: Total Length: Select above ID: 1.07" Bore
$ 44.99 USD
43-03-052-A
Fox - FIST Seal Head, 0.5" Shaft x 1.5 Body
 Includes (1) Complete Seal Head Assembly with FIST Scraper   Application: Common Fox 1.5 Snow Shocks w/ 0.5" Shaft  ...
$ 74.99 USD
65-03-001
Fox - Fitting, Plug, 5/16-24 ORB
Includes (1) Screw w/ O-Ring
$ 12.99 USD
11-03-003
Fox - Float 3 Air Sleeve Bushing
Includes (1) Replacement Bushing   Air Sleeve Bushing installer and sizer required for install. Click here!  Applications: Fox Float Gen3...
$ 14.99 USD
64-03-048
Fox - Float 3 Spanner Wrench for Seal Head, Extended
Includes (1) Seal Head Removal Tool/Wrench. 3/8" drive socket.   Application: Fox Float 3 Seal Head
$ 99.99 USD
84-03-598-A
Fox - Float Guard, Gen 3 EVOL RC2, Pair
Includes (2) Body Guards and Decals, All Mounting Hardware
$ 74.99 USD
110-03-114
Fox - Gen 1 and 2 Evol, Evol X Air Sleeve (Black)
*Notice: This style air sleeve is no longer available. We can machine a Float 3 Air sleeve to have gen...
$ 174.99 USD
09-03-018
Fox - Mount Bushing, DX, .875" Shaft x .470" Length
Includes (1) DX Bushing   Applications: Fox DX Bore Eyelets.   Dimensions: For Housing ID 1.097" For Shaft/Pin .875" OD...
$ 12.99 USD
48-03-029
Fox - Needle, Damping Adjust, Low Speed
Includes (1) Needle
$ 19.99 USD
53-03-000
Fox - Negative Spring Guide, 1/2" Shaft, 1.15" OD
Includes (1) Negative Spring Guide.   Dimensions:  .5" Shaft 1.15" OD For .82" ID Springs   Applications: Commonly Used on...
$ 6.99 USD
53-03-008
Fox - Negative Spring, 0.820" ID, Select Length and Rate
Includes (1) Negative Spring.   Dimensions:  .820" ID Please Select Your Desired Length and Rate   Applications: Commonly Used on...
$ 14.99 USD
64-03-029-A
Fox - Pin Spanner Wrench Set, 2.5" IBS Shocks
Includes (2) Pin Spanners   Applications: Fox Internal bypass 2.5" shocks.    Includes (1) inner and (1) outer Pin Spanner...
$ 389.99 USD
64-03-032
Fox - Pin Spanner, IQS Cinch Ring
Include (1) Pin Spanner   Applications: Used to remove and properly torque Fox IQS adjusters.
$ 149.99 USD
37-03-014
Fox - Piston Band, Small Body, Solid
Fox Part # 002-02-015
$ 19.99 USD
37-03-016
Fox - Piston Band, Step Cut, Bronze PTFE, 1.459 Bore
Dimensions: 0.300" W X 4.640" TLG X 0.050" TH, Ø 1.459" Bore
$ 12.99 USD
32-03-004-A
Fox - RA Knob Assembly, Float Evol X, Gen 2
Includes (1) Knob, Detent Ball, Spring, and O-ring This part is No Longer Available.   Contact info@hygearsuspension.com for compatibility questions and...
$ 32.99 USD
23-03-019-A
Fox - Rebound Eyelet Assembly, 7/8" Shaft, 2.1" Base to Center Eye
Includes (1) Rebound Eyelet Assembly   Vehicle Application:Common SxS Rear Shock, 7/8" Rebound Shaft (see dimensions)Can Am MaverickDimensions:A Base to Center Eye:...
$ 149.99 USD
23-03-125-A
Fox - Rebound Eyelet Assembly, 7/8" Shaft, 3.10" Base to Center Eye
Includes (1) Rebound Eyelet Assembly.   Dimensions: A Base to Center Eye: 3.100"B Mount (Thread ID): 5/8-18" UNFC Base Diameter: 1.8"...
$ 149.99 USD
23-03-019
Fox - Rebound Eyelet, 7/8" Shaft, 2.1" Base to Center Eye
Includes (1) Rebound Eyelet (bare) Dimensions: A Base to Center Eye: 2.1"B Mount (Thread ID): 5/8-18 UNFC Base Diameter: 1.5"...
$ 59.99 USD
16-03-001-A
Fox - Reservoir Cap, Pellet Port, 2.0 Smooth Bore, Assembly
Application:Fox 2.0 smooth bore (non Step) reservoir bodies.Common use on Podium Gen 1&2 Shocks Dimensions Ø 1.834" Bore, 3/8-24 Inflation Port  0.650" tlgIncludes...
$ 54.99 USD
21-03-313
Fox - Reservoir Decal, Factory Orange
Includes (1) Reservoir Decal
$ 12.99 USD
16-35-001-A
Fox - Reservoir End Cap Upgrade, Schrader Fill
See service alert! Includes (1) Reservoir Cap (with Stainless Steel Schrader valve and sealed cover)   Application Fox 2.0(1.834") or...
$ 49.99 USD
16-03-010-A
Fox - Reservoir End Cap, 1.459" Bore, Schrader Valve
Includes (1) Reservoir Cap  + (1) Air Valve Cap Dimensions 1.459" Bore, 5/16-32 Schrader valve
$ 49.99 USD
19-03-002-A
Fox - Reservoir Mount, 2.0" ID, Base Plate, Hon / Suz ATV
Fits common Fox 2.0 Reservoirs Relaxed opening is 2.125” (53.975 mm)Uses x2 M8-1.25 FastenersBracket spacing is 2.4375" max width   Application:This...
$ 124.99 USD
19-03-003-A
FOX - RESERVOIR MOUNT, 2.0" ID, BASE PLATE, YFZ 450 R/X
Fits common Fox 2.0 ReservoirsUses x2 M8-1.25 Fasteners   Application:This clamp is for FOX Aftermarket Rear Shocks and is normally...
$ 174.99 USD
42-03-016
Fox - Reservoir Tube, 1.834" Bore, Black
Includes (1) Reservoir Tubed   Application: Commonly Found on Fox ATV, Snow and SxS shocks.   Dimensions: Total length: Select...
$ 59.99 USD
42-03-024
Fox - Reservoir Tube, 1.834" Bore, Kashima
Includes (1) Reservoir Tube   Application: Commonly Found on Fox ATV, Snow and SxS shocks.    Dimensions: Total length: Select...
$ 114.99 USD

Scroll To Top